Tipo

• Punch 

  Accessories Clamp Die Die Holder Adaptor Hemming Die Hemming Fix Base Hemming Punch Hemming Punch and die Hemming Punch and die spare part Mark Free Bending Movable Hemming Die Polyurethane Insert Polyurethane Insert Holder Punch Adaptor Punch Holder Punch insert Radius Insert Radius Insert Holder Spare part Z Insert Z Insert Holder

Stile

•  Bystronic style
•  Euro style
•  Lvd style
•  Trumpf style
•  Wila style

Angolo

• (nessun filtro) 

  26° 28° 30° 35° 45° 60° 75° 80° 85° 86° 88° 89.66° 90°

RAGGIO

• (nessun filtro) 

  0 0.2 0.5 0.6 0.8 0.37 0.65 1 1.5 2 3 4 4.8 5 6 6.4 8 10 12 17.5

Lunghezza

• (nessun filtro) 

  10 20 25 415 505 515 835 835 Sect 1030 1050 Sect B

Altezza (mm)

• (nessun filtro) 

  65 65.2 65.5 65.8 65.68 66.2 66.4 66.34 66.65 66.91 66.92 67 67,6 69.4 69.65 69.92 69.95 84.05 84.15 84.31 85 86 88.68 89.4 89.4 89.4 89.4 89.4 89.34 89.34 89.65 89.91 89.92 90 94.4 94.65 94.91 94.92 96.65 97.7 99.4 99.65 99.91 99.92 100 102 103.8 103.68 104 104.3 104.4 104.34 104.65 104.91 104.92 105 108.8 113.8 115 117 118.68 119.4 119.34 119.65 119.91 119.92 120 128.8 130 133.8 135 140 144.4 144.4 145 155 159.4 159.65 160 175 200 220 240 250 300

MATERIALE E TRATTAMENTO

• (nessun filtro) 

  42CrMo4 Induction Hardened 55-58 Hrc 42CrMo4 Through Hardened 45-49 Hrc C45 induction hardened 55-58 Hrc

V1

• (nessun filtro) 

  6