Type

• (no filter) 

  Accessories Clamp Die Die Holder Adaptor Hemming Die Hemming Fix Base Hemming Punch and die Hemming Punch and die spare part Mark Free Bending Movable Hemming Die Polyurethane Insert Polyurethane Insert Holder Punch Punch Adaptor Radius Insert Radius Insert Holder Z Insert Z Insert Holder

Angle

• (no filter) 

  26° 30° 35° 45° 60° 70° 75° 80° 85° 88° 88°-85° 90° 140° 150° 160°

RADIUS

• (no filter) 

  0 0.2 0.5 0.6 0.8 0.37 0.65 1 1.5 2 3 4.8 5 6 6.4 8 17.5

Lenght

• (no filter) 

  30m 34 99 100 150 412 415 420 505 835 835 Sect 1050 1260 2100

HEIGHT ( mm )

• (no filter) 

  10 20 21 25 26 30 34 38 39 45 46 50 51.5 55 59 60 65 65.2 65.5 65.8 65.68 66.2 66.4 66.34 66.65 66.91 66.92 67 67.6 69.4 69.65 69.92 69.95 75 80 83.5 84.05 84.15 84.31 85 86 88.68 89.34 89.65 89.91 89.92 90 94.4 94.65 94.91 94.92 95 97.7 99.4 99.65 99.91 99.92 100 102 103.8 103.68 104 104.3 104.4 104.34 104.65 104.91 104.92 105 110 113.8 115 117 118.68 119.4 119.34 119.65 119.91 119.92 120 123 128 128.8 130 133.8 135 145 150 159.4 159.65 160 195 200

MATERIAL AND HEAT TREATEMENT

• (no filter) 

  42CrMo4 GOLD 42CrMo4 Induction Hardened 55-58 Hrc 42CrMo4 Through Hardened 45-49 Hrc C45 C45 induction hardened 55-58 Hrc C50 TEMP S2312 Induction Hardened 55-58 Hrc

V

• (no filter) 

  12

V1

• (no filter) 

  4 6 8 10 12 14 16 18 20 22 25 32 40 50 63 80 100 125 160 200